• Miami:(786) 565-9359 / (786) 565-9368
  •   (786) 955-6027 / (786) 955-6147
  •   (786) 955-6198 / (305) 816-6181
  •   (305) 816-6239
  • Phoenix: (623) 849-1338
  • Address: 16725 NW 20th Ave,
    Miami Gardens, FL 33056

Outback Power EnergyCell 200RE 200 Amp Hour AGM Battery

Brand: Outback Power
Product Code: EnergyCell 200RE
Availability: In Stock
Dimensions: L: 22in  x  W: 13in  x  H: 5in
Weight: 150.00lb
$420.00
Qty:  
Outback Power

Outback Power EnergyCell 200RE 200 Amp Hour AGM Battery

Product Highlights

  • Maintenance-Free batteries
  • Valve regulated lead acid battery
  • Designed for high power density and renewable energy
  • Utilizes Absorbent Glass Mat (AGM) technology
  • Up to 99% and freedom from electrolyte maintenance
  • Features low profile terminals with threaded copper alloy inserts
    The EnergyCell RE valve regulated lead acid battery is designed for high power density and renewable energy cycling applications. This battery utilizes Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance. The EnergyCell RE also features low profile terminals with threaded copper alloy inserts providing reduced maintenance and increased safety.
     

 

Technical Specifications

 
  • EnergyCell RE Front Terminal Battery
      ENERGYCELL 170RE ENERGYCELL 200RE
    Cells Per Unit: 6 6
    Voltage Per Unit: 12 Vdc 12 Vdc
    Operating Temperature Range: Discharge: -40°F (-40°C) to +160°F (71°C) Charge: -10°F (-23°C) to +140°F (60°C)
    Optimal Operating Temperature Range: +74°F (23°C) to +80°F (27°C)
    Recommended Maximum Charging
    Current Limit per String:
    25 Adc 30 Adc
    Float Voltage Charge: 13.62 to 13.8 Vdc/unit Average at 77°F (25°C)
    Equalization and Cycle
    Service Charging Limits:
    14.4 to 14.8 Vdc/unit Average at 77°F (25°C)
    Self Discharge: Battery can be stored up to 6 months at 77°F (25°C) before a freshening charge is required. Batteries stored at temperatures greater than 77°F (25°C) will require recharge sooner than batteries stored at lower temperatures.
    Temperature Compensation Factor
    (Charging):
    5mV per degree C per cell (2V)
    Terminal: Threaded copper alloy insert terminal to accept ¼-20 UNC bolt
    Terminal Hardware Initial Torque: 110 in-lbs (12.4 Nm)
    Weight (lbs/kg): 115 lbs (52 kg) 131 lbs (60 kg)
    Dimensions: 11.14 x 22.01 x 4.95” (28.3 x 55.9 x 12.6 cm) 12.60 x 22.01 x 4.95” (32.0 x 55.09 x 12.6 cm)
     
     
     

 

Specifications
Spec

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: