Schneider TR RS Remote On/Off Switch for TR series Inverters 989-1060
Xantrex TR Remote On/Off Switch
Manufacturer Part Number: 989-1060
Xantrex TR-Remote - Trace Series Remote On/Off Switch
The TR-REMOTE ON/OFF SWITCH duplicates the ON/STANDBY switch on the Trace Series Inverter/Charger and displays general system operating parameters. The TR-REMOTE ships with a 50 ft (15 m) length of special 6-conductor cable which connects directly to the Trace Series Inverter/Charger's COM port.
- Easy-to-Read Indicator Light
- Front Panel Control
- Plug-in Installation
- The following system operating parameters are displayed with a single indicator light.
- Inverter Status (ON/OFF)
- Fault or Warning Indicator
When the TR-REMOTE is used with the Trace Series Inverter/Charger the red indicator light will display the following:
|Solid:||Normal operation. If qualified AC line is present, unit is in charge/standby mode and passing AC through to the loads. If qualified AC line is not present, unit is in invert mode.|
|Slow Flashing:||Active Warning is present.|
|Fast Flashing:||Active Fault is present.|
|Off:||The unit is off.|
The TR-REMOTE must be connected before turning the inverter ON from the ON/STANDBY button. If the unit is not responding to the TR-REMOTE, switch the unit OFF and then ON using the ON/STANDBY button.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: