• Miami:(786) 565-9359 / (786) 565-9368
  •   (786) 955-6027 / (786) 955-6147
  •   (786) 955-6198 / (305) 816-6181
  •   (305) 816-6239
  • Phoenix: (623) 849-1338
  • Address: 16725 NW 20th Ave,
    Miami Gardens, FL 33056

Disconnect Nonfused SQD DU221RB 30A-240V AC 2P NEMA3R

Brand: Square-D
Product Code: 053-02318
Availability: In Stock
Dimensions: L: 4in  x  W: 8in  x  H: 10in
Weight: 5.00lb

Disconnect Nonfused SQD DU221RB 30A-240V AC 2P NEMA3R

According to the National Electric Code, section 690.15, PV arrays must have a disconnecting means to isolate the inverter from the PV power source. Utility intertie inverters that utilize PV arrays with voltages above 250 VDC require a disconnect rated for 600 VDC to perform this function. The Square-D 600 VDC 30 amp 3-pole safety switches are UL listed to handle 13A at 600VDC per pole. They can be used for disconnecting up to three PV arrays for three grid-tie inverters. It has wiring lugs that are rated to accept two #14 to #10 wires in each lug. This allows the disconnect switch to also act as a string combiner in systems that utilize two strings of PV modules per inverter. All other Square D 600 VDC disconnects are rated for disconecting one string at full rated power.

Many utilities require an AC disconnect between an intertie inverter and the AC load center, close to the AC service entrance, with a visible and lockable handle. A 30 amp 240 volt disconnect is good for up to 5kW at 240 VAC (one or two 2500W intertie inverters) and the 60 amp disconnect is good for up to 12.5kW (three to five 2500W intertie inverters). For connection of multiple inverters to one of these disconnects, use an AC load center, with a circuit breaker for each inverter installed, as an AC combiner box between the inverters and the disconnect switch.The breakers can be back-fed with the inverter outputs and the load center main lugs will handle the combined outputs to be connected to the AC disconnect.

Use Class-R fuses of the proper amperage for fused disconnects. Disconnects are raintight (NEMA 3R) for outdoor use.



Model Maximum Voltage System Voltage Poles Ampere Rating Enclosure Dimensions Weight Fusible
DU221RB 240 VAC 240 VAC 2 30 Amp Nema 3R 9.63" x 7.25" x 3.75" 4.4 lbs. No

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: